|
|
Study of electrolyte influence on diaphragm discharge stability and efficiency
Němcová, Lucie ; Krčma, František (referee) ; Kozáková, Zdenka (advisor)
This thesis is focused on so-called diaphragm discharge, which is one kind of electric discharges in liquid, which belongs among so-called AOP´s techniques, still more used for water cleaning in the present. One of effectiveness and stability indicators of diaphragm discharge is generation of hydrogen peroxide. In theoretical part, detail principle description of electric discharge in liquid is situated. Further, properties of electrolyte are introduced and general spectrophotometric method of obtained sample determination is described. In experimental part, a full procedure of experiment is introduced. Next part containing results and discussions introduces particular results of individual measurements and their reasons. Final chapter is the end, which forms total summary and evaluation of all results. By the application of all chosen electrolytes in solution at diaphragm discharge formation of hydrogen peroxide has appeared. Inorganic and organic electrolytes were used. As inorganic electrolytes following salts were selected – solutions of halogenides, next sodium nitrate as a representative of nitrates, potassium dihydrogenphosphate as a representative of phosphates, etc. Representative of organic electrolytes was citric acid. The value of initial conductivity of electrolytes had the main influence on hydrogen peroxide formation. Electrolytes potassium dihydrogenphosphate and sodium sulphate the great influence on effectiveness and stability of the diaphragm discharge. Their rate constants reached maximum value by the application of solution with initial conductivity of approximately 400 mikrosiemens, particularly 0.0492 mmol/l.min and 0.048 mmol/l.min. On the contrary, low values of rate constant were achieved in electrolyte ammonium chloride at around the same initial conductivity – 0.0269 mmol/l.min. During experiments stainless steel and platinum electrodes were used. It was found that kind of electrode material hadn’t influence on generation of hydrogen peroxide. Hydrogen peroxide was formed only in the cathode space.
|
|
|
Study of Plasma - Liquid Interactions
Němcová, Lucie ; Brablec, Antonín (referee) ; Obradovic, Bratislav (referee) ; Krčma, František (advisor)
Disertační práce se zabývá detailním studiem vlastností různých elektrických výbojů generovaných ve vodných roztocích. Tyto výboje se staly v posledním desetiletí velmi populárním tématem, a to zejména díky mnoha praktickým využitím jako například v biomedicíně, čištění odpadních vod, ekologii nebo nanoinženýrství. Studium je zaměřeno na generaci peroxidu vodíku, jakožto jednu z nejvýznamnějších částic generovaných právě elektrickými výboji v kapalinách. Pro první část této práce byla využita speciální výbojová komora zkonstruovaná na Fakultě chemické Vysokého Učení Technického v Brně. Komora byla rozdělena tenkou diafragmovou přepážkou na dvě poloviny, přičemž uvnitř přepážky se nacházela malá dírka. V každé části komory se nacházela jedna elektroda, a obě dvě části komory byly vyplněny kapalinou. Ze zdroje bylo do kapaliny aplikováno vysokofrekvenční napětí (1 a 2 kHz), které tak vlastně upravovalo roztok chloridu sodného (1.5 l). Bylo zjištěno, že tento druh napětí, v porovnání s DC, nezpůsobuje nežádoucí přehřívání roztoku (počáteční vodivost 100 - 800 S/cm) během jeho úpravy při zachování účinnosti produkce peroxidu. Experimentální aparatura pro druhou část práce byla sestavena na Gentské Univerzitě v Belgii. Stejnosměrný výboj byl generován v bublinách plynů (He, Ar, N2, vzduch) v prostředí vodných roztoků. Byla studována generace peroxidu vodíku a odbourávání organických barviv přítomných ve zkoumaném roztoku. Ke generaci peroxidu vodíku byl použit roztok NaH2PO4 . 2H2O (5 microS/cm, V= 750 ml), ke zkoumání rozkladu barviv byly použity roztoky organických barviv Direct Red 79 (20 mg/l) a Direct Blue 106 (20 mg/l, V= 750 ml). Minimální koncentrace peroxidu vodíku byla naměřena při aplikaci proudu 10 mA, zatímco maximální koncentrace peroxidu vodíku byla zaznamenána při použití proudu 30 mA. Rozklad organických barviv vykazoval stejné vlastnosti. Čím vyšší byla dodávaná energie, tím více barviva se odbouralo. Třetí část práce probíhala ve spolupráci s Queen's University of Belfast, Centrum for Plasma Physics, UK. K realizaci experimentů bylo využito vysokofrekvenčního plazmového skalpelu (Arthrocar). Bylo zjištěno, že hodnota koncentrace peroxidu vodíku dosahovala maxima v roztocích s nepatrným přídavkem alkoholu (0.25 %). Celkem byly studovány čtyři 0.15 M roztoky BaCl2, Na2CO3, KCl a NaCl (V= 20 ml), jejichž počáteční vodivost se pohybovala kolem 13 mS/cm. Z výsledků bylo patrné, že největší rozdíl hodnot pH byl zaznamenán u roztoků s přídavkem ethanolu. V optických emisních spektrech byly identifikovány především radikály OH, které jsou prekurzory peroxidu vodíku. Výsledky ukázaly, že plazma v takovémto roztoku je stále tvořeno, což může být považováno za první krok generace plazmatu v organických sloučeninách. Poslední část práce byla zaměřena na tzv. mikroplazmatický jet v přímém kontaktu s kapalnou fází. Tato experimentální práce byla realizována na pracovišti Nanotechnology & Integrated Bio-Engineering Centre (NIBEC), University of Ulster, UK během studijní stáže. Jako vodivé médium byl použit roztok trihydrátu kyseliny chlorozlatité s různou počáteční vodivostí. Zajímavým zjištěním je fakt, že při tomto druhu měření bylo generováno stabilní plazma i při velmi malém výbojovém proudu (0.05 a 0.2 mA), a tedy i peroxid vodíku vznikal při velmi malé vstupní energii, což může být považováno za velmi dobrý výsledek.
|
|
|
Study of gas influence on chemical processes initiated by electrical discharge in liquids
Dürrová, Anastasia ; Krčma, František (referee) ; Kozáková, Zdenka (advisor)
This thesis in the theoretical part focuses on the gas influence on chemical processes initiated by electrical discharge in liquids. This part described the possible diagnostic methods of reactive particles whitch are produced in water solutions after plasma treatment. The influence of different experimental conditions, such as the influence of gas, effect of voltage polarity, effect of electrolyte of hydrogen peroxide formation were studied. The comparison of selected two gases with different property, argon and oxygen, were realized. The effect of pH in phosphate solution was studied. This solutions are able to maintain relatively stable pH during the experiment and due to this property phosphates are very perspektive for medical applications.
|
|
|
Preparation and characterization of plasma activated water for bio applications
Lemonová, Hana ; Matěj,, Klas (referee) ; Krčma, František (advisor)
The aim of this master thesis is the preparation and characterization of plasma activated water (PAW) prepared by dielectric barrier discharge at atmospheric pressure in air for the future applications in agriculture and medicine. The theoretical part is focused on plasma activated water and its effects on seeds and plants. The work also deals with the preparation and application of PAW in the world. Various types of plasma discharge configurations suitable for its preparation are described here. In the experimental part of the master thesis, distilled and tap water were chosen for activation. The concentrations of active particles in PAW generated by DBD such as nitrites, nitrates and hydrogen peroxide were determined. The value of the concentration of active particles changes probably due to mutual interactions when nitrites are oxidized by hydrogen peroxide to nitrates. Physical properties of PAW such as conductivity and pH were also characterized. After the preparation of PAW, the conductivity increases due to the increase in the concentration of active particles formed by dissociation and ionization of water molecules by plasma. The particles presented in the air, which are dissociated and ionized by plasma, also diffuse into the liquid, and contribute to this increase. The decrease in pH also corresponds to an increase in the concentration of hydrogen ions and the formation of nitric acids. Another aspect of this work was to study plasma activated water during the first eight hours after its preparation and to determine its properties. We have found that PAW prepared from tap water retains its characteristic properties for at least 8 hours and distilled water for 6 hours. In the master thesis, the analysis of plasma discharge was performed using optical emission spectroscopy. OES measurements were performed in the wavelength range 300 to 800 nm. The second positive nitrogen system (N2 (C 3u) N2 (B 3g)) and the first positive nitrogen system (N2 (B 3g) N2 (A 3+u)) were identified in the overview spectrum. Molecular nitrogen ions, OH· radicals, atomic oxygen and atomic hydrogen can be observed in the spectrum, too. The dielectric barrier discharge was also captured using a high-speed camera, and the recording shows the occurrence of multiple discharges that are spatially as well as temporary unstable.
|
|
|
Use of stress factors for the production of lipid substances by yeasts of the genus Metschnikowia
Tručková, Marie ; Márová, Ivana (referee) ; Němcová, Andrea (advisor)
This Master´s thesis consists of two parts. The theoretical part is focused on the influence of various stress factors in the cultivation process, such as osmotic stress, oxidative stress, dehydration, cultivation time, pH or temperature on yeasts of the Metschnikowia genus. The practical part deals with osmotic and oxidative stress. Oxidative stress was performed under two different conditions (various cultivation time and temperature). The properties of yeast production were monitored mainly by gas chromatography and marginally also by flow cytometry. The analysis was performed for Metschnikowia pulcherrima, Metschnikowia andauensis, Metschnikowia chrysoperlae, Metschnikowia sinensis, Metschnikowia zizyphicola and Metschnikowia shanxiensis strains. The results showed that both oxidative stress and osmotic stress induce better lipids production. The amount of lipids, especially the fatty acid composition, also varied depending on the strains studied and the culture conditions used. The production of unsaturated fatty acids was further demonstrated in this work. The most suitable medium for the production of lipids and unsaturated fatty acids was the salt medium. It is clear that yeasts of the genus Metschnikowia are highly adaptable yeasts. Therefore, they might be potentially auspicious biotechnology producers.
|
|
|
Carbon nanoparticles from South Moravian lignite
Drozdová, Miroslava ; Enev, Vojtěch (referee) ; Pekař, Miloslav (advisor)
This bachelor thesis deals with the issue of isolation of carbon nanoparticles from lignite, which seems to be their cheap source. The aim of this work is to elaborate a research on the use of coal matrices as a source of carbon nanoparticles and also to design and perform further experiments testing the usability of South Moravian lignite. Based on the literature search, a simple mechanochemical procedure was proposed to obtain carbon nanoparticles from lignite. The lignite was mechanically stressed by the ultrasonic disintegrator with simultaneous action of water or hydrogen peroxide. Lignite has been able to isolate particles fluorescing in the blue visible light, but the process will need to be further modified. However, South Moravian lignite could be a source of carbon nanoparticles.
|
|
|
South-Moravian lignite as a source of carbon nanoparticles
Drozdová, Miroslava ; Taraba, Boleslav (referee) ; Pekař, Miloslav (advisor)
This Master’s thesis deals with isolating carbon nanoparticles from South Moravian lignite using "green" – environmentally friendly methods. This method consists of mechanical-chemical-thermal stressing of lignite using ultrasound, hydrogen peroxide and high temperatures. This work aims to develop recommendations on coal as a source of carbon nanoparticles and based on these recommendations, to design procedures for isolating nanoparticles from South Moravian lignite using environmentally friendly methods. The identified procedures were designed to meet carbon-based particles with an oxidized surface. From the results we can deduct that it is possible to use South Moravian lignite for the preparation of carbon nanoparticles. However, it will be necessary to modify the process further and also to optimize the purification of the obtained particles.
|
|
|
Characterization of plasma activated water for biomedical applications
Šindelková, Kateřina ; Dzik, Petr (referee) ; Kozáková, Zdenka (advisor)
The aim of this master thesis is to characterize plasma activated water (PAW) prepared in various plasma systems using direct and indirect interaction of plasma with liquid or its surface. Plasma was generated by electric discharges at atmospheric pressure. The prepared plasma-activated water was studied with respect to its use in biomedical applications. The theoretical part deals with plasma activated water. It contains a description of the PAW preparation, its characterization in terms of produced particles or its physico-chemical properties. Also, methods for antimicrobial activity estimation or colorimetric determination of produced particles are described in this section. In the experimental part of this work, the types of discharges that were used for the PAW preparation and their comparison are presented. Two types of liquids were selected for the activation, namely distilled and tap water. Subsequently, concentrations of selected reactive particles in PAW (hydrogen peroxide, nitrates and nitrites) produced in three different plasma systems were determined. Besides the comparison of reactive particles production in various systems, their time stability was studied as well. Over time after the PAW preparation, the values of active particles concentrations have changed due to mutual interactions between the particles. Mainly, nitrites were oxidized to nitrates or vice versa depending on the PAW type and other conditions. Part of the work was also monitoring selected physical properties of PAW, namely pH value and specific conductivity. It has been found that PAW does not retain its activated properties for too long, depending on the type of preparation and methods of storage. Therefore, one of the important goals of this work was to determine and compare suitable storage conditions for PAW with respect to its potential biomedical applications.
|
|
|
Comparison of plasma activated water quality prepared by different plasma systems
Staškovanová, Denisa ; Krčma, František (referee) ; Kozáková, Zdenka (advisor)
This diploma thesis deals with generation of reactive species (hydrogen peroxide, nitrates, nitrites) using various plasma systems in distilled and tap water. Prepared plasma activated water differs in the way the plasma is applied, namely plasma above the water surface, plasma inside water or bubbling of plasma gaseous products into water. The main goal is to determine the amount of species produced in different plasma systems and compare them with each other. The effect of ozonizer experimental conditions on the generated amount of reactive species is also monitored.
|
|
|
Preparation and characterization of plasma activated water
Lemonová, Hana ; Klímová, Edita (referee) ; Krčma, František (advisor)
This bachelor thesis deals with suitable methods for plasma activated water preparation. The plasma activated water is a new way of the indirect plasma application for the treatment of biological materials like food or even for the direct application for therapeutic purposes. The theoretical part is focused on getting acquainted with plasma activated water and methods for its preparation, using various plasma systems. The detailed description of the plasma-liquid systems used during this thesis is given later. The selected physical chemical properties, namely conductivity, pH value and stability of hydrogen peroxide are presented in the results part. An important aspect of this work was to find suitable storage conditions for plasma activated water.
|
guest ::
